First, before the engine is used, it is necessary to carefully read the instruction manual of the machine. The user must pay special attention to the basic requirements of the book: 1. Use the fuel of the specified grade, fully precipitate and filter before use, the oiler keep clean. 2. Lubricants should be kept clean, and the amount added must be sufficient, and they should be replaced regularly. The use of the grades should be consistent with the regulations. 3. Air filter should always pay attention to maintenance. 4. Pay attention to adding cooling water, especially not to make the engine work in the absence of water. 5. Always pay attention to check, tighten the bolts and nuts, especially the connecting rod bolts, the bolts on the drive shaft and the lock nuts on the flywheel, the fastening nuts on the wheels, etc.
The second is that the newly purchased agricultural machinery should not be loaded immediately, and it should be tested and run in accordance with the instructions. After the running-in is completed, the machine oil filter is cleaned and residual impurities in the engine oil are removed. If necessary, the engine oil must be replaced and the oil pan cleaned.
Third, it is not free to refit the new machinery and arbitrarily increase the speed of the engine. In order to make the machinery run faster, some of the operators are more likely to adjust the fuel supply and pressure of the high-pressure pump, and some of them put the speed-control spring wire together. This is even more wrong.
Fourth, when the new machinery is in operation, it must strictly follow the requirements of the manufacturer's instructions. No overload, no speeding, no overfeeding, no long-term overloading.
Dr System,Floor Mounted System,Floor Mount Dual Stand,Floor Flat Panel System
MinFound Medical Systems Co., Ltd , https://www.minfoundmed.com