1. The correct attachment of the rotary cultivator is to make the universal joint rotate flexibly and flexibly without any stagnation.
Second, when the rotavator is to be attached, the universal joints at both ends can be on the same plane, and the active shaft and the driven shaft of the universal joint transmission shaft can be in the same straight line in the working state.
2, the correct operation of the rotary cultivator a rotary cultivator lifting should not be too high. As a result of the excessive lifting, the universal joints will be spoiled, and parts will be damaged due to the collision between the suspension chain of the down draw bar and the drive shaft of the universal joint.
2 When the tractor power output shaft is engaged, the rotary cultivator cannot be raised too high. That is, the inclination angle of the universal joint shaft must not be too large and must be engaged after the clutch is completely separated.
3 For split hydraulic system, rotary cultivating depth applies cylinder positioning valve and positioning clamp control. In the tilling, the dispenser handle should be placed in the floating position, not in the neutral position.
3. Correctly maneuvering the tractor 1 The ploughing of the rotavator should be done by using a tractor while walking, so as to avoid sudden increase in resistance and damage to the machine.
2 All blades of the cultivator must be unearthed before turning or reversing.
3 When shifting or crossing the field or passing the raft, the rotary cultivator shall be referred to the highest position, and the joint oil of the power shaft shall be cut off at the same time, and the suspension device shall be fixed at a certain position with a locking device.
4 When the parking is not rotating, the rotary cultivator shall be lowered to the ground and shall not be suspended or parked for a long time.
4. Pay attention to personal safety 1. When the rotary cultivator is stopped by the wrapper during work, the pedal cannot be forced to rotate, otherwise it is easy to get injured by the foot. The correct method is: move the handle of the power output shaft to the neutral position, and then use a long-handle tool to remove the weeds.
2 When the rotary cultivator is in operation, people are forbidden behind the machine and above the machine to prevent accidents.