6 tips to teach you the right choice of solid wood flooring

Autumn is the golden season of decoration. In the decoration, the choice of floor is very important. The floor is not like other furniture. If you are not satisfied, you can come back again or throw it away. Laying the floor is a big project or a one-off project, and it must be a successful renovation project. Here Xiao Bian talks about the skills of picking up the wooden floor, so that you can choose the wood floor you want!

1, wood species Wood flooring materials are varied, there are imported materials, domestic materials, precious pears, teak, etc., due to different tree species, wood properties and prices vary greatly. At present, many tree species names are freely named by importers, causing serious names in the market. Before buying wood flooring, you can check the type of floor you need against the "Main Imported Wood Names in China" and "Main Chinese Wood Names".

2, specification size Solid wood flooring specifications are: length 450-910mm, width 90-125mm, standard thickness of 18mm, lower than this standard is non-target, non-target plate strength and stability is poor. From the aspect of wood stability, the smaller the floor size and the better the resistance to deformation, consumers should choose short, narrow solid wood floors, the deformation of which is relatively small, can reduce the solid wood floor bending, twisting, scooping, cracking, Shrinking, arching and other phenomena.

3, moisture content Water content is a direct impact on the floor deformation, cracking the most important factor, the general rule, the floor moisture content of 7% -12%, the maximum does not exceed 14%, be sure to see the test report or on-site determination of moisture content when buying .

4. Board quality Quality of board surface is one of the main basis for floor classification. Visually inspect whether the floor is made of the same material and whether the surface of the board is cracked, rotted, clipped, dead knot, bug eyes, blue stains, or other material defects. Normally, it is not necessary to require chromatic aberration, joints, textures, etc. This is the natural property of wood. It is the color difference and rich natural texture that shows the natural qualities of solid wood flooring.

5, paint quality board surface after paint processing called paint board, when selected should pay attention to: the paint surface should be uniform, smooth, smooth (chamfering does not include); no paint, no bubbles, no cracks. At the same time also to meet the following requirements: First, whether the adhesion of the floor paint film is qualified, it is best to choose products that meet the national standards; Second, the surface of the floor is better wear resistance, the best choice for wear products in the 0.15g/100 rpm within the product; Third, the hardness of the paint film is high, and it is best to choose products that meet the national standard H or higher.

6, baseboard and layering a square meter floor requires at least one meter skirting board, so the price and quality of the skirting board is also something you must be concerned about. The skirting board is usually made of fir or pine finger joints, and the height is generally 7-10 cm. The material of the bead is plastic steel, aluminum alloy, and finger-jointed solid wood.