What are the debugging tasks for using the beverage filling machine?

Beverage filling machine is used for filling carbonated beverages such as carbonated drinks, soda water, salt soda, etc. It can also be used in filling non-steam beverages such as juice drinks and pure water, and it is multi-purpose and highly practical. mechanical.

The following is a company specializing in the production of beverage filling machines by Zhangjiagang City Linguan Machinery Co., Ltd. , to share the following methods for debugging beverage filling machines :

1. First loosen the nut and adjust the screw to change the position of the lower rod. Therefore, the push-pull length of the syringe is also changed to achieve the purpose of free adjustment of the dispensing amount.

2. Loosen the nut and determine the correct position of the upper rod according to the push-pull length of the different syringes. After the lower fixed rod is adjusted, turn the crank to turn the syringe to the top dead center, then lift the outer sleeve of the syringe upward by about 2mm to avoid smashing the needle tube, and then tighten the nut before turning it on.

3. After the beverage filling machine is adjusted, the nut is tightened, so that the lower fixing rod and the crank are firmly fixed.

4. After the beverage filling machine is assembled correctly, the switch is turned on. When the machine is working, the pump is driven by the crank to pull down the liquid, adjust the speed knob, select the appropriate dispensing speed, start normal operation, adjust the governor knob, and clockwise. Fast, but slow.

When we are debugging the beverage filling machine , we can follow the above debugging method and hope to help everyone. If you want to know more about filling machinery and equipment, please let us know and look forward to discussing with you!