Electric drying oven maintenance manual

The electric drying oven is used for drying, baking, waxing and sterilization of industrial and mining enterprises, laboratories and scientific research units. The microcomputer intelligent binocular temperature control system has temperature control protection, which is accurate and reliable. The working temperature is arbitrarily set, and has a deviation alarm function, the air inlet switch is free, and the hot air is circulated.

Maintenance first book

1. Before use, be sure to check if the power supply voltage used matches. When using, the power outlet ground wire must be grounded as specified.

2. When using the power supply, avoid touching the electrical parts of the space on the left side of the box with a hand or wipe it with a damp cloth and water. The power should be cut off during maintenance.

3. The power cord should not be wrapped around metal objects. It should not be placed in a place with high temperature or humidity to prevent the rubber from aging and causing leakage.

4. Do not over-extrude the contents of the box, and leave room for natural convection of the air so that the humid air can accelerate out on the wind top.

5. Regularly check whether the silver contacts of the temperature regulator are hairy or uneven. If there is any, use a fine gauze to level the contacts, then use them, and always wipe them clean with a cleaning cloth to make them in good contact (be careful to cut off) power supply). Do not hit the metal pipe of the indoor temperature regulator to avoid affecting the sensitivity.

6. Do not put flammable materials in the dry box without explosion-proof device.

7. After each use, the power supply must be cut off, and the inside and outside of the box should be kept clean. Hang the corresponding logo after cleaning.

Antipyretic Analgesics

Lysine Aspirin,Indomethacin Capsules,Analgesic & Antipyretic,Diclofenac Injection Uses

NINGBO VOICE BIOCHEMIC CO. LTD , https://www.pharma-voice.com