Tealth 1: 5 LED Increase Push Bottom Dental Contra Angle Handpiece

  • Model NO.: 1020CHL-105
  • Certification: TUV, ISO, CE
  • Light Way: With LED Light
  • Usage Times: Non-Disposable
  • Loading Way: Gland Type
  • Exhaust Way: Internal Exhaust
  • Connection: Without Quick Connector
  • Noise: Less Than 70dB
  • Trademark: TEALTH
  • Specification: Aluminum, stainless steel
  • HS Code: 90184100
  • Condition: New
  • Material: Stainless Steel
  • Water Way: Inner Channel
  • Application: Adult, Child
  • Head Diameter: Middle Head
  • Number of Holes: Two Holes
  • Rotating Speed: Low-Speed Handpiece
  • Gear Ratio: 1:5 Increase
  • Transport Package: Plastic Box
  • Origin: China
Tealth 1: 5 LED Increase Push Bottom Dental Contra Angle Handpiece
TEALTH LED 1:5 increasing speed contra angle
Model: 1020CHL-105
Tealth 1: 5 LED Increase Push Bottom Dental Contra Angle Handpiece


Features:
1push button head,  burs are not flied out .  inner water supply. 
2. be availabe to replace LED,  LED illumination , self power 
3. detachable head, completely be clean up . 
4. It is used for slitting of cap crown, processing of teeth,cavities and crwon preprations,  restoration surface and removal of fillings. removal of carious marterial

Tealth 1: 5 LED Increase Push Bottom Dental Contra Angle HandpieceTealth 1: 5 LED Increase Push Bottom Dental Contra Angle Handpiece

Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.

Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.

 

Introducer Needle

pidural and spinal combined anesthesia puncture, Epidural Needle ,Introducer Needle, Infusion Pumps ,trachea cannula,


Components FOR AS-E/S FULL KIT

Name Spec. Qty.
Epidural needle 16G 1
spinal needle 25G 1
No damage Anesthesia
Catheter (Patent)
length>90cm
OD 1.0mm
1
Anesthesia catheter adapter -- 1
Air   filter - 1
Liquid   filter - 1
Catheter assist   guide - 1
Surgical latex   gloves 7.0# 7.5# 8# 1
Negative   pressure tube - 1
Sponge brush   3
 
Sterile injector   needle
16G       1.6 1
  22G       0.7 1
  23G       0.6 1
Low-resistance injector 5ml  
 
Sterile syringe
20ml 1
  3ml 1
Woundplast - 1
Compresses 7*7*8 3
Tray cover - 1
Catheter   adhesive slice 5cm*8cm 1
Bottom cover -  

(AS-E/S) Combined spinal Epidural Anesthesia puncture package/kit
(AS-E) Epidural anesthesia puncture package/kit
(AS-S) Spinal anesthesia puncture package/kit
(AS-N) Nerve Anesthesia puncture package/kit

Y-valve Connector
Blood Inflation Balloon

Introducer Needle

medical product

Other Medical Product

Epidural Needle,Introducer Needle,Infusion Pumps,Tracheal Cannula,Y-valve Connector,Blood Inflation Balloon

Anesthesia Medical Co., Ltd. , http://www.sinoanesthesia.com