Precautions for the use of stainless steel clean two-way transfer window

Precautions for the use of stainless steel clean two-way transfer window

The stainless steel clean two-way transfer window is an auxiliary equipment for the clean room. It is mainly used for the transfer of small items between the clean area and the clean area and the non-clean area to reduce the number of times the clean room is opened. The degree of pollution in the clean room.

The working area is made of stainless steel plate, which is smooth and smooth, and the inner corner arc transitions. The two sides of the transfer window are equipped with a fan to start the interconnection function, so that any one of the two doors can be automatically supplied with air. Lighting and UV germicidal lamps are used in synchronization with the start of the fan.

The door of the transfer window is normally closed. When the material is delivered, the transmitter first rings the doorbell. When the other party answers, the door is opened again. After the material is sent in, the door is closed immediately, and the receiver opens another door to the material. After taking it out, close the door again. Since all the transfer windows are equipped with interlocking devices, the door of the transfer window can only be opened on one side and closed on the other. Open the door of the transfer window (if the other side of the door is not closed, you can't open it), put the material to be transferred into the transfer window, close the door of the transfer window, and the other operator opens the door and takes out the material in the transfer window. Close the door of the transfer window.

Stainless steel clean two-way transfer window use precautions:

1. Since the transfer window is interlocked, when the door on one side cannot be opened smoothly, it is caused by the fact that the door on the other side is not closed. Do not forcefully open it, otherwise the interlock device will be damaged.

2. When the material is from low level to high clean level, the surface of the material should be cleaned.

3. When the interlocking device of the transfer window cannot work normally, it should be repaired in time, otherwise it cannot be used.

4. Always check the operation of the UV lamp and replace the UV lamp regularly.

5. Do not store any materials or debris in the transfer window.